Sensor Switch Ceiling Mounted Low Voltage Sensor

Be the first to review this product

$79.99
OR

Quick Overview

The CM 10 Series Extended Range 360º occupancy sensor incorporates Passive Infrared (PIR) technology into an attractive and economical sensor to provide maximum viewing from the ceiling. When mounted at 9 ft, this sensor views up to 28 ft in all directions. Its circular coverage pattern is designed for walking motions; making it ideal for T-shaped intersections in corridors, or other areas where wall mounting a sensor is not practical. A long hallway, for example, may require a HW13 Series Hallway sensor at each end, with CM 10s mounted in the center to fill in the distance. Low ceiling heights are also best covered by the CM 10. For example, when mounted at only 7 ft, the height of pick aisles in many distribution centers, the CM 10 provides a 32 ft diameter pattern of coverage. In applications where detection of minor motion is also required, use the CM PDT 10 Series Dual Technology sensor.

Sensor Switch Ceiling Mounted Low Voltage Sensor

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

The CM 10 Series Extended Range 360º occupancy sensor incorporates Passive Infrared (PIR) technology into an attractive and economical sensor to provide maximum viewing from the ceiling. When mounted at 9 ft, this sensor views up to 28 ft in all directions. Its circular coverage pattern is designed for walking motions; making it ideal for T-shaped intersections in corridors, or other areas where wall mounting a sensor is not practical. A long hallway, for example, may require a HW13 Series Hallway sensor at each end, with CM 10s mounted in the center to fill in the distance. Low ceiling heights are also best covered by the CM 10. For example, when mounted at only 7 ft, the height of pick aisles in many distribution centers, the CM 10 provides a 32 ft diameter pattern of coverage. In applications where detection of minor motion is also required, use the CM PDT 10 Series Dual Technology sensor. SENSOR OPERATION The sensor detects changes inhttp://www.currentelectricsupply.com/index.php/admin/catalog_product/categories/id/514/key/73b9f08f1e757c1dbbf200e21c8a0352/ the infrared energy given off by occupants as they move within the field-of-view. When occupancy is detected, a DC output goes high and can drive up to 200 mA of connected load. The sensor is powered with 12-24 VAC/VDC and typically operates with a PP20 or MP20 power pack, enabling complete 20 Amp circuits to be controlled. This innovative sensor requires no field calibration or sensitivity adjustments. LAMPMAXIMIZER® This sensor also contains patented LampMaximizer technology that allows users to aggressively target energy savings while still protecting lamp life. A minimum on timer, factory set at 15 minutes, helps preserve lamp life by eliminating all lamp cycles shorter than lamp manufacturer’s recommendations. A standard occupancy time delay is also present that ensures lights turn off (assuming minimum on timer has elapsed) if no occupancy is detected. This timer is factory set at 10 minutes to promote energy savings, but is adjustable between 30 seconds and 20 minutes. These adjustments can be done manually, through the unit’s push-button, or automatically every two weeks through an advanced mode, called LampMaximizer+, that determines the optimum time delay in order to maximize both lamp life and energy savings. Additionally, this sensor maintains statistics on total lamp on time and number of cycles

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.